Knowledge Hub
Stan Bond no longer manufactures shower screens. This page is care advice for glass that already has an EnduroShield coating. It is not an offer of a new shower screen. If you have a shower screen we supplied, see our shower screens service update.
Care advice for existing EnduroShield-coated glass
EnduroShield is an easy-clean coating that is applied to the inside surface of shower screen glass and acts as a shield. The coating bonds to the glass and helps protect it against dirt, grime and soap scum, from staining, etching or discolouring the surface.
EnduroShield repels both water (hydrophobic) and oil (oleophobic) leaving an easy to clean surface that is very similar to a non-stick fry pan. The coating is also completely invisible and does not change the look or finish of the surface.
This means you clean less often with less effort, and the coating can make regular cleaning easier. Performance and warranty coverage depend on the product, application and care conditions.
Maintaining the coated surface
Glass shower screens
To keep your glass shower door looking new, the glass needs to be cleaned each week using a damp microfibre cloth and a mild detergent (such as washing-up liquid) to remove any soap scum, dirt, or grime from the glass.
Wiping the glass down with a squeegee helps to keep the glass free of spots between cleans. Good brands include Ettore and Pulex. Regular maintenance ensures the protective coating continues to repel water effectively, maintaining clarity and ease of cleaning.
What to avoid
Be careful not to use any rough, gritty, highly acidic, alkaline, or abrasive cleaners such as Comet (powder), Ajax, or cerium oxide, as they may damage the protective coating. Cleaners like this damage or polish back the actual substrate of the surface, reducing its ability to repel water and protect against soap scum.
Acceptable cleaning products
From time to time people want to know examples of cleaners that they can use on their treated surface, over the suggested maintenance. EnduroShield is very robust. In fact, there is no solvent that can remove the coating but as listed above there are some product types that should be avoided.
Accelerated testing undertaken to simulate 10 years of cleaning was undertaken using 5 of the top-selling cleaning brands in the US, showing no detriment to the coating.
-
Windex
-
Lysol 4in1 Bathroom Cleaner
-
Fantastik Orange Action
-
Green Works Natural Glass & Surface Cleaner (by Clorox)
-
Clean Shower Daily Shower Cleaner (Arm & Hammer)
Although these cleaners can be used, EnduroShield is designed to be an ‘Easy Clean coating’ that requires only mild soaps that do not contain harsh or toxic chemicals to maintain the surface effectively. It should be noted that with any cleaner used on the EnduroShield surface a thorough rinse with clean water should follow immediately.
Glass Surfaces Maintenance
EnduroShield is not just limited to shower screens; it can also be applied to windows, mirrors, and other glass surfaces. The protective coating provides an effective barrier against grime and reduces scrubbing efforts, saving valuable time in maintaining a clean look.
Cleaning Shower Glass Effectively
To maintain your shower glass in top condition, regularly wiping it down with a damp microfibre cloth can help prevent soap scum build-up. The maintenance section above uses a damp microfibre cloth and a mild detergent. A separate aftercare product is not required by those instructions.
Dealing with Soap Scum and Hard Water
South Australia has quite hard water with a higher concentration of mineral deposits than other states. A lime and calcium build-up may occur on the protective coating and may not be easily removed with a mild detergent. A solution of white vinegar and water (1 part vinegar to 5 parts water) should be sprayed onto the glass and allowed to soak for several minutes. This will dissolve any mineral deposits that have built up on the glass surface. A damp microfibre cloth should then be used to wipe over the glass.
Tip for extreme hard water conditions
Around the world, some unique locations have extremely harsh conditions. In these environments, EnduroShield is a great choice. If you didn’t have the EnduroShield protection, your glass may have to be restored or even replaced. In some cases, this staining can occur in under 1 year. Cities such as New Orleans, Louisiana, and Perth, Western Australia, have very high mineral concentrations.
Being robust, the EnduroShield coating allows you to have great-looking glass, but it requires more effort in these specific environmental conditions. Minerals prevalent in the water can still build up over time, forming deposits on the EnduroShield coating. We recommend using the vinegar/water solution every week or so to reduce this build-up on the surface rather than allowing it to accumulate over a long period.
Frequently Asked Questions
What is EnduroShield glass treatment?
EnduroShield glass treatment is a protective coating applied to glass surfaces to prevent soap scum, dirt, and grime from adhering, making cleaning easier.
How often should I clean my shower glass with EnduroShield coating?
It is recommended to clean your shower glass weekly using a damp microfibre cloth and a mild detergent to maintain clarity and prevent soap scum build-up.
Can EnduroShield be used on other glass surfaces?
Yes, EnduroShield can be applied to windows, mirrors, and other glass surfaces to provide a protective coating that repels water and reduces cleaning time.
What cleaning products are safe to use with EnduroShield?
Mild soaps and approved cleaning products like Windex, Lysol 4in1, and Green Works Natural Glass & Surface Cleaner are safe for use on EnduroShield-treated surfaces.
Does EnduroShield work on hard water stains?
Yes, although hard water stains can still form, they are easier to remove with a vinegar and water solution rather than harsh scrubbing.
What should I avoid when cleaning EnduroShield-treated glass?
Avoid abrasive tools and harsh cleaners that can damage the coating. The manufacturer permits white vinegar for mineral deposits when used according to the applicable care instructions. Check compatibility with surrounding finishes and rinse after cleaning.
How long does the EnduroShield coating last?
Coverage and service life depend on the product, application and maintenance conditions. Check the warranty and care guide supplied with your installation, and contact the original supplier if you need help identifying the applicable version.
Can I apply EnduroShield to existing shower screens?
Yes, EnduroShield can be applied to existing shower screens and other glass surfaces to provide a protective barrier against grime and soap scum.
What is the best way to deal with mineral deposits on EnduroShield-treated glass?
A solution of white vinegar and water can be used to dissolve mineral deposits without damaging the coating.
Is EnduroShield suitable for areas with extreme hard water conditions?
Yes, but additional maintenance, such as weekly vinegar treatments, may be needed to prevent build-up in harsh water conditions.
Follow the instructions supplied with your installation and the manufacturer’s current care guide. Check that any cleaner is also suitable for surrounding stone, metal, grout and finishes, and rinse after cleaning.
