Motorised Blinds Adelaide

The price depends on the product, the size of the opening, the fabric, and whether the motor is battery or hardwired. A Somfy TaHoma hub, if you want app or voice control, is quoted with the blinds. Request a free in-home measure and quote for a price for your home.

Battery-powered motors (like the Somfy Sonesse Ultra 30 WF) are rechargeable lithium-ion, need no electrician or wiring, and are ideal for retrofitting existing blinds, rental properties and rooms without a nearby power point. You charge them by USB cable or a window solar panel. Charging intervals depend on the motor, battery, blind weight and daily use; we confirm the expected interval for the selected model. Hardwired 240 V motors are more appropriate for high-traffic windows (kitchen, living room), commercial applications, new builds, whole-home setups, or when doing a renovation and wiring is accessible, and they need an electrician for the power connection. Stan Bond installs both. We recommend the best option based on your specific windows and usage patterns, and we match the motor to your blind and your home. A side-by-side comparison is in our battery or hardwired guide.

Sometimes, and often for roller blinds. A retrofit may be possible if the tube profile, drive, brackets, blind weight and controls are compatible with the selected motor. For many roller blinds a battery motor replaces the chain winder with no bracket changes. Other blinds and curtains depend on the system and brand. For outdoor blinds like Ziptrak, motorisation typically requires purpose-built motors and tracks. Tell us the blind type, and send photos of the motor label, remote and blind so we can check compatibility, which matters because many people do not know their motor or remote brand. The best way to assess compatibility is with a free in-home measure - our team will check your existing installation and advise whether retrofit is viable or a new system is recommended.

App, voice and scheduling functions depend on the motor model, radio protocol, hub and platform. Before ordering, we confirm the supported Australian configuration and any required bridge or accessories. Automate and Somfy hubs can offer app control, schedules, scenes and voice control, subject to that confirmation. A compatible remote may be used without a smart-home hub. We keep one control system per job and do not mix Automate and Somfy, because mixing them on the same job causes setup and service problems. Ask us which suits your blinds. See our home automation page.

A compatible multi-channel remote can control several blinds, but the motor and remote systems must match. Separate motorised outdoor blinds each need their own motor even when they share a remote. If you are adding to existing blinds, send the remote model and order details before choosing the new motor. Matching the brand name alone does not confirm compatibility.

Both are good systems, and we install both. They use different remotes and hubs, so we do not mix them in one home. We recommend a motor by blind size and weight, whether you have power nearby, and the control and smart-home setup you want. A consultant can walk you through the choice for your windows.

The motors are designed to run quietly, but the whole blind can still click or make some noise as fabric and hardware move. A quiet motor describes the motor only, not the complete blind. Ask us to demonstrate in the showroom so you can judge the sound for yourself.

It depends on the blind size and how often you use it. Supplier figures indicate several hundred up-and-down cycles per charge, which is roughly a year of daily use for an average blind, and a window solar panel can remove most manual charging. We will tell you the charging method for your blind and how to check the battery.

A wind sensor can retract a blind or awning when wind rises, which suits exposed positions. It is an extra layer, not a guarantee, because sensors have thresholds and gusts can arrive faster than a blind travels. Discuss sensors at quote stage, not after installation.

Some outdoor motors detect an obstruction on the way down and stop. Detection needs about one full tube revolution to learn, so a blind blocked right at the top will not detect it. Clear the area before lowering, and ask us which motor suits your blind.

Motorised outdoor blinds need a power source and earthed cable, so you may need an electrician as well as an installer. Battery motors need charging instead of hard wiring. Our scope ends at the motor going up and down; your integrator or electrician programs scenes.

Spring is quick and popular for smaller blinds, crank suits heavier or wider ones, and a motor suits large, high or hard-to-reach blinds and adds remotes, timers and sensors. Very large blinds use heavier tubes that cannot take a spring, so they are motorised or cranked.

Hardwired motors designed for wired switching, such as the Acmeda M6 or Somfy LS40, suit C-Bus and BMS systems. Our scope ends at the motor going up and down; your integrator or electrician programs scenes, touchpads and the user interface. Each wired motor needs its own switch cable, and motors must not be wired in parallel.

Many, but not all, and the motor depends on the product. Roller blinds have the widest choice of battery and 240 V motors. Roman blinds, honeycomb, some aluminium venetians and curtain tracks can also be motorised, using different systems, and some motors are roller-only. Tell us the blind type and we will confirm the right combination.

They remove the chain or cord, which is the main hazard. A wand motor uses a magnetic wand with no exposed chain or button within a child's reach, and motorised blinds have no chain at all. Where you do choose a chain or cord, the law requires a restraint if a chain hangs below 1.6 metres from the floor.

Check the electrical scope on your quote before installation. A hardwired motor needs a suitable power connection, but fitting the blind does not automatically include an electrician. Ask who will arrange the electrical work, what it costs and when it needs to happen. Battery motors avoid fixed wiring at the window but still need a suitable charging arrangement.

The remote battery and a rechargeable blind motor are separate power sources. Changing one does not recharge the other. Tell us which blind is affected, any beeps or flashing lights, and the remote or motor model if known. We will check the correct charging or troubleshooting instructions. If the charging point is out of reach, contact our service team for help.